Build It Bunny Pot 25ml

Previous Product Next Product

Magpie Builder Gel

Formulation Update

We’ve made a subtle refinement to our BUILT IT Builder Gel, resulting in a slightly lower viscosity. This update allows for smoother self-levelling and a more effortless application, while maintaining the same strength, durability, and wear you know and love.

TIP: If you find the product is moving more quickly than you’re used to, we recommend working one nail at a time and curing between nails for optimal control and structure.

BASELESS - can be used alongside any Magpie Base if preferred

Easy SOAK OFF

Effortless SELF LEVEL

Free from HEMA & DI-HEMA

Vegan friendly and cruelty free

EXTEND using forms or tips

Suitable for natural nail overlays

CHIP & LIFT resistant

100% GEL

3 WEEKS + wear 

60 SECOND cure

 25ml

STEPS FOR APPLICATION

1. Complete thorough dry nail prep. Push back the cuticle from the nail plate. Remove ALL non-living tissue with a sharp cuticle tool and nippers if needed. Shape the free edge into the desired shape using a 240 grit zebra file. Use the same file (not a buffer) to lightly etch the surface to remove shine. Apply a generous amount of Magpie Prep & Dehydrate liquid to a lint free wipe. Scrub the nail plate, side walls and underneath the free edge thoroughly. Perfect prep is VITAL to a long-lasting manicure. If there is any dust, oil or dead skin left on the nail, no matter how small, the product may start to lift.

2. For the first layer, like you would base coat. Apply BUILD IT thinly, making sure to seal every free edge and cure for 60 seconds in your Magpie Lamp. If preferred you can switch this step to any Magpie Base. There should be no product touching the cuticle area or side walls. Use the Magpie Sir tool, to clean up any areas if needed.

3. Apply a THIN layer of BUILD IT, DO NOT cure. This will act as your 'slip' layer to help manoeuvre the next layer around the surface. Place a larger bead of builder gel onto the nail in to the apex location. Use your brush to lightly move the product in to place. Make it nice and neat around the cuticle area without touching the skin, then feather the remaining product down towards the free edge. Apply as many layers of BUILD IT as the natural nail requires. Weaker and longer nails will need more structured layers.

4. Using Magpie Prep and Dehydrate to remove the inhibition layer. Use a new wipe for each hand. Finish file and buff to refine if needed. Apply your chosen gel colour, top coat and cuticle oil.

For best results we recommend using the Magpie Gel Lamp

 25ml

Build It vs. Give Me Strength+ — Which Should You Choose?

Build ItGive Me Strength+
Creates strength and structureAdds strength without bulk
Thicker viscosityMedium viscosity
Controlled self-levelling to prevent floodingRapid self-levelling
Builds apex and structure quicklyApply in thin layers
Ideal for overlays and extensionsIdeal for natural nail overlays
Suitable for all nail lengthsSuitable for short to medium natural nails
Can create short and medium extensions using tips or formsCan create short extensions
Outstanding adhesionOutstanding adhesion
Lasts up to 4 weeksLasts up to 4 weeks
Quick soak-off or infillQuick soak-off or infill
HEMA & TPO FreeHEMA & TPO Free
Available in bottles and potsAvailable in bottles and pots

Which Is Right For Me?

Choose Build It if you want to build an apex, add structure, or create extensions. Choose Give Me Strength+ if you want to strengthen natural nails with a lightweight overlay and minimal bulk.

Build It Bunny Pot 25ml — Baseless Builder Gel

Build It Bunny Pot is a 25ml pot version of Magpie's Build It Bunny shade — the same super strong, lightweight, baseless builder gel already available in a 16ml bottle, now in a larger pot format for technicians who get through more product per week. The formula, strength, wear and application are identical to the bottled version; only the packaging and fill size change.

Like the rest of the BUILD IT range, it's baseless and can be applied directly to a properly prepped natural nail, or layered over any Magpie Base, and carries the same recent formulation update giving a slightly lower viscosity for smoother self-levelling.

Why Professionals Choose It

  • Baseless formula — use alone or with any Magpie Base
  • Effortless self-level, smoothed further by the latest formulation update
  • Free from HEMA and Di-HEMA
  • Chip and lift resistant, with 3 weeks+ wear
  • Easy soak-off removal
  • Vegan-friendly and cruelty-free
  • 100% gel, extendable using forms or tips
  • 25ml pot format — more product per container than the 16ml bottle, for higher-volume use

Who It's Suitable For

  • Salons and technicians using Bunny frequently enough to prefer buying in bulk
  • Salon professionals building structured overlays and extensions
  • Technicians who want acrylic-level strength without the odour or dust

Application Guide

  1. Complete thorough dry nail prep — push back the cuticle, remove all non-living tissue with a sharp cuticle tool and nippers if needed. Shape the free edge with a 240 grit zebra file, then use the same file (not a buffer) to lightly etch the nail surface. Apply Magpie Prep & Dehydrate to a lint-free wipe and scrub the nail plate, sidewalls and underneath the free edge thoroughly — any trace of dust, oil or dead skin left behind will cause lifting.
  2. For the first layer, apply Build It thinly as you would a base coat, sealing every free edge, then cure for 60 seconds under a Magpie Gel Lamp. You can substitute this step with any preferred Magpie Base. Keep product off the cuticle area and sidewalls, using the Magpie Sir tool to clean up if needed.
  3. Apply a thin layer of Build It without curing — this acts as a 'slip' layer that helps the next layer move into place. Place a larger bead of gel at the apex, use the brush to position it neatly around the cuticle without touching skin, then feather the remainder down towards the free edge. Repeat with as many structural layers as the nail requires — weaker or longer nails need more support.
  4. Use Magpie Prep and Dehydrate to remove the inhibition layer, using a fresh wipe for each hand. File and buff to refine if needed, then apply your chosen Gel Colour, top coat and cuticle oil.

Top Tips

  • If the product feels like it's moving more quickly than you're used to since the formulation update, work one nail at a time and cure between nails for better control.
  • Cure time is 60 seconds per layer under a Magpie Gel Lamp.
  • As with any pot-format product, use a clean, dry spatula to take product out rather than dipping fingers or a used brush directly into the pot, to keep the remaining product free of contamination.

Frequently Asked Questions

How is the pot different from the 16ml bottle?
It's the same Bunny shade and formula, just supplied in a larger 25ml pot rather than a bottle — useful for salons going through more product.

What size is the pot?
25ml.

Do I need a base coat first?
No, it's baseless, though it can be used alongside any Magpie Base if preferred.

What's the cure time?
60 seconds per layer under a Magpie Gel Lamp.

Is it HEMA-free?
Yes — free from both HEMA and Di-HEMA.

Technical Specifications

Size25ml (pot)
Cure time60 seconds per layer (Magpie Gel Lamp)
Formula100% gel, baseless
HEMA-freeYes
Wear3 weeks+
Vegan / cruelty-freeYes
BrandMagpie Gel

25ml

MAGPIE GEL

Build It Bunny Pot

Price per unit 32,60 €

Add to wishlist

Popular Products!

Take a look at the rest of the girls
Magpie Hearts
Magpie Glitters Magpie Glitters
Magpie Gel Products - Fully Manufactured in the UK and EU What a dull life without glitter
We Accept Stripe and PayPal
Magpie Europe is an Irish Vat Registered Business IE3902423MH
Company Number 710913